Search results

  1. Tkhawk

    JKU Modular Hard Top with Frontrunner Rack

    Guys, I'm planning on selling my Jeep so I thought that I'd post my @jscherb inspired modified top here first. I utilized a Frontrunner rack so that I could leave the top on and take the back and sides off. I converted the rack to the shorter style, but have the parts to make it the full rack...
  2. Tkhawk

    Converting a factory JK/JKU hardtop to modular

    Guys, I'm planning on selling my Jeep so I thought that I'd post my @jscherb inspired modified top here first. I utilized a Frontrunner rack so that I could leave the top on and take the back and sides off. I converted the rack to the shorter style, but have the parts to make it the full rack...
  3. Tkhawk

    Intech RV

    I have a Smittybilt generator that I use. It's 2600 max / 2300 continuous. I did add a soft start to the A/C because the compressor wouldn't start every time. Now it works great.
  4. Tkhawk

    MIssion Overland Trailer Owners page

    Maybe switch the nuts out for some low profile cap nuts? https://www.mcmaster.com/nuts/cap-nuts/low-profile-cap-nuts/
  5. Tkhawk

    cargo area storage cover mods/ideas

    I cut my factory one with a jig saw when I built my fridge slide. It works great, but I don't plan on selling. Also after @jscherb convinced me to take a cut off wheel to the hard top, its a lot easier to cut up less visible things.
  6. Tkhawk

    Converting a factory JK/JKU hardtop to modular

    I hadn't thought about the rollup windows and their zipper strips working as a drip rail. I would be more likely to attempt that instead of redoing the flanges. Thanks!
  7. Tkhawk

    Converting a factory JK/JKU hardtop to modular

    One regret that I have from doing my top was not thinking to add a drip rail. My Jeep has been through a couple of thunder storms now with the side and rear panels off and its not too bad but some water does drip inside. My finished product is pretty ugly so one day I might redo it and add drip...
  8. Tkhawk

    Barn Door for JK factory hardtops

    That's what I was thinking, ordered this one yesterday : https://www.amazon.com/dp/B01NALJOWF/ref=cm_sw_em_r_mt_dp_P7k4FbNQ6JG9A?_encoding=UTF8&psc=1 and a rv sink drain.
  9. Tkhawk

    Barn Door for JK factory hardtops

    Any leads on where to source just that sink? I can't find a collapsible one with a good drain/stopper that also has a good lip for dropping in a cutout like this.
  10. Tkhawk

    Starting from scratch: How to haul and camp w/ 4 dirt bikes and people?

    Have you looked at the Intech Discover? https://www.intechrv.com/models/flyer/discover/ It would be a bit for the Jeep, but might be possible if lightly loaded for jeep trips.
  11. Tkhawk

    Best way to secure a Max Coupler hitch when leaving the trailer in camp for the day

    I pull the max coupler out of the trailer and slide in a blank receiver hitch cover in and use my locking pin through the cover. https://www.amazon.com/dp/B000P437WE/ref=cm_sw_em_r_mt_dp_ePSXFbZRN24B5
  12. Tkhawk

    Converting a factory JK/JKU hardtop to modular

    It's the frontrunner rack. The only modification that I made to the rack to make it work was to add spacers between the bracket and inside of the roof to keep the height just right.
  13. Tkhawk

    Converting a factory JK/JKU hardtop to modular

    Thank you! Yeah, I really like how clean it looks. Yes, I squirted some of the 6ten epoxy into the gaps where it had pulled apart and it's holding good. It's been on for almost 3 months and only one more small section peeled back, so I'll shoot some epoxy into it before I put it back together.
  14. Tkhawk

    Converting a factory JK/JKU hardtop to modular

    Well it's done finally... kinda. I got the wrong black paint and I will eventually clean up the inside where I had to go back and add epoxy under the flanges. But I love it! Thank you @jscherb for the instructions and help along the way!
  15. Tkhawk

    Converting a factory JK/JKU hardtop to modular

    Thanks, yeah I used the smc all resin. I sill have some 6 ten epoxy and one more mixing tip so I'll give that a shot. I'll just spray some white paint on it if I end up with some visible resin. Thanks again!
  16. Tkhawk

    Converting a factory JK/JKU hardtop to modular

    Well I messed up somewhere. I guess I didn't sand enough off or clean the surface enough afterwards. Is there anything I can do to salvage it, short of breaking it off and starting over?
  17. Tkhawk

    Intech Flyer Pursue AC

    I have the same a/c in my 2020 Explore. It is very loud inside, but I'm not sure about ear plug loud. I feel like most of the noise comes from the blower not the compressor, so maybe fixing what ever is wrong with it would help some.
  18. Tkhawk

    Dreadlocks outfitting of InTech Discover

    Here's what I did for water on my Explore. I got a rv quick disconnect shower and mounted it where you are talking about, I cut 3 pieces of 2" dowel rod to put between the inner and outer skin to add rigidity. I bought an extra qd hose section and replaced the hose with a folding faucet. I put a...
  19. Tkhawk

    JK Front Turn signal wiring question!

    Just weak. Iirc the first 2 were broken when I received them and the other one broke after being installed a few days.
  20. Tkhawk

    JK Front Turn signal wiring question!

    Two separate places on the led circuit board and then once on the plug side. The soldier didn't have good adhesion to the contacts and would just peel off. To fix the circuit board side, I cut/broke the lens from the housing, repaired it, and then glued the lens back on.
Top