Search results

  1. H

    How to swap out the thermistor in your Dometic CFX

    Nice writeup! Where did you purchase the thermistor from? Thanks Randy
  2. H

    AEV 3.5” lift on 37s - 2015 JKUR

    Complete drivetrain overhaul.... -Currie 44/60 axle setup with 5.13 gears -Dynatrac ball joints -Complete Steersmart steering setup -AEV high capacity springs -JKS upper and lower adjustable control arms -Adams front and rear driveshafts -Teraflex upgraded front and rear brake setup...
  3. H

    AEV 3.5” lift on 37s - 2015 JKUR

    I'm running the 4 1/2" AEV high capacity springs with 37's. Let me know if you have any questions. Randy Instagram: overland_rubi
  4. H

    Real world experience with AEV High Capacity JKU springs (or other HD springs)

    I've been running the 4 1/2" HC springs for over a year now and I'm very happy with them. Typically I'm loaded down about the same, fairly heavy rig. I tried other setups, but they would sag or bottom out frequently. No complaints at all, I'm on Currie axles and currently running 37's. Randy...
  5. H

    GROUP BUY: Kermit Chair Group Buy - Expedition Portal Logo Optional!

    Please take my name off your list, I unfortunately couldn't wait any longer and ordered one direct from Kermit Chair minutes ago. Sorry Randy
  6. H

    GROUP BUY: Kermit Chair Group Buy - Expedition Portal Logo Optional!

    Any update? I saw a post from Kermit Chair on Instagram that some would be available this week.
  7. H

    JKU Trail Kitchen build....

    I used a 1"x1" steel tube fastened down to the rear seat belt locations in the floor which everything anchors to. I got this idea from another gentleman on the message board and it worked out great and has been the "backbone" of my setup. See attached pics and let me know if you have any other...
  8. H

    JKU Trail Kitchen build....

    I used a combination of brackets and connection methods for my build depending what all I had going on at that specific area, check out the below link for Zyltech. https://www.zyltech.com/aluminum-extrusion/
  9. H

    JKU Trail Kitchen build....

    Correct, I used their 2020 material and it is 20mm. https://www.zyltech.com/aluminum-extrusion/
  10. H

    JKU Trail Kitchen build....

    It's worked out flawlessly for the past year, no issues at all. My only change has been the rear platform, tore off the vinyl and went with a bedliner. I'll be putting it to the test later this year, I have a coast to coast trip planned. Let me know if you have any questions. Randy...
  11. H

    Joolca Hot Water System

    I just ordered one today, I'll let you know my thoughts.
  12. H

    Joolca Hot Water System

    I'd be interested in hearing thoughts also. Randy
  13. H

    Help...want USB charging hub for dash tray area

    I ended up making some custom pods towards the front of the tray with some blue sea usb ports, worked out nicely. Randy Instagram: overland_rubi
  14. H

    Building a Plywood Deck Plate in the Back of your JKU

    Thanks, I did my platform with the diamond plate rubber and I'm not happy with it. Sounds like a winter mod. Take care! Randy
  15. H

    Building a Plywood Deck Plate in the Back of your JKU

    What did you use for the finish, is that a bedliner spray? Randy
  16. H

    RRT Top Heavy Jeep, suspension/sway bar suggestions

    I actually made straps myself from my Rhino-Rack down that catch the soft top track under the hardtop. Very similar to TrailRax, check them out.
  17. H

    RRT Top Heavy Jeep, suspension/sway bar suggestions

    Check out AEV high capacity springs, they're perfect for your combo. I love mine, couldn't be happier!
Top