Search results

  1. cdn_xj

    Opinions: Pioneer tool mounting

    The additional weight would likely overpower the struts that hold up the liftgate. The design of my swing-away tire carrier does not lend itself to mounting a shovel and pick. Besides, that's where I've mounted the hi-lift. IN the roof basket isn't really an option because that would eat up a...
  2. cdn_xj

    Opinions: Pioneer tool mounting

    Howdy all, I have a '99 Jeep Cherokee with a full length ARB roof basket and am trying to decide on how to mount my spade, clay pick, and axe. I've acquired a Carter T-handle spade and a clay pick with the steel collar a la Camel Trophy as well as the Land Rover mounts for them. I was...
  3. cdn_xj

    1997 Cherokee XJ "GROOT" Overland Build

    Since it does not look as if you've re-geared yet, I'm going to throw in my $ 0.02. I'm running 33x10.50-15 BFG KO All Terrains and I had previously re-geared to 4.11s. Mathematically the 4.11's are bang-on for upgrading from stock tires and 3.55s to 33s. BUT I failed to take into...
  4. cdn_xj

    99 Jeep XJ Intro and expedition "build" attempt! Plus some restoration.

    :Wow1::Wow1::Wow1: Good score on the 241! Keep us posted on any mods required to get it installed. (and by "us" i mean "me" lol)
  5. cdn_xj

    1997 XJ Purchase Questions

    MY1996 and later were equipped with the 29-spline 8.25. This holds for NON-ABS equipped XJs. If the XJ is ABS equipped, then it would have had the Dana35. Prior to 1996MY if it had an 8.25, it would have been the 27-spline. IIRC 1997MY Should have the high pinion D30.
  6. cdn_xj

    Safari Snorkel Pre-Cleaner

    Since this thread's been given the Lazarus treatment (not by me) I'm going to throw this question out there: I've got the Jeep 4.0L engine which, by all accounts and through the use of handily provided formulae, I've figured that the MAX intake cfm is around 370. This is if I've got it wrung...
  7. cdn_xj

    1989 Cherokee Laredo Build Thread

    Looking good! I've been thinking about the FarmTek flooring for my roof rack as well. Do you find that you are able to secure your tiedowns to the flooring? (In other words, are you able to get the hooks through the holes?) Also, I did a little research on the Donaldson style precleaner...
  8. cdn_xj

    On-Island XJ Build

    IIRC that's there to clear the front driveshaft at stock height, full compression.
  9. cdn_xj

    What did you do to your Expo Jeep today?

    You can get just the AEV tire carrier and make it work with other bumpers. Paul from overlandjeep.ca did just that. You can also contact Christian Hansen @ Peden 4 Wheel Drive for details. IIRC the AEV carrier mounts directly to the frame and not to the bumper itself. The only issue that...
  10. cdn_xj

    What did you do to your Expo Jeep today?

    My tires are still in good shape, which is why I went with limb risers. Besides, given that BC is a rainforest, there are more than a few low-hanging branches and the risers actually do serve a purpose out here. :)
  11. cdn_xj

    What did you do to your Expo Jeep today?

    This seems to be the usual remedy. lol
  12. cdn_xj

    What did you do to your Expo Jeep today?

    There's no extraneous noise as a result of having them on. Then again, I have a full ARB rack and lights on the front of it so even if there were a little bit of noise I probably would not hear it. Also, an XJ is not exactly a shining beacon of soundproofing. lol
  13. cdn_xj

    What did you do to your Expo Jeep today?

    Upgraded my limb riser setup. Got rid of the turnbuckles in favor of the same tensioners used by Safety Devices when they equipped the Camel Trophy Defenders and Discos. They are called Shroud Levers and are used in sailboat rigging and make the whole process of mounting and dismounting the...
  14. cdn_xj

    Need help with wheel width/backspacing for 98 cherokee

    In addition to this, keep in mind that (if I read it correctly) he currently has 1.5" spacers to accomodate the different bolt pattern of his current wheels. When shopping for new rims, get rid of the spacers and get rims that will fit on the original bolt pattern (5 x 4-1/2" or 5 x 114.3mm)...
  15. cdn_xj

    What did you do to your Expo Jeep today?

    Steel Tail Light Boxes... ... and Grote LED lights.
  16. cdn_xj

    C.Shontz 2001 Jeep Cherokee (Progress)

    The end of an era.
  17. cdn_xj

    XJ ARB Bull Bar

    Did you acquire the bullbar new? or used? And which version did you get? the older or the newer? I have the older version and there are 2 brackets that bolt to the chassis of the XJ and the bullbar, in turn, bolts to the two brackets. I vaguely recall having read somewhere that there might...
  18. cdn_xj

    3rd gen 4Runner vs. Jeep Cherokee XJ

    Wow... petty much? I was starting to think I had wound up on pirate4x4.com
  19. cdn_xj

    Overland XJ Build. Not my first Rodeo.....(video included)

    That's what I was leading to. I guess I should have been more explicit. :) You would want the breather hose to sit where the snorkle and a-pillar run alongside each other. Probably on the back-side of the snorkle so it's well shielded from branches, etc.
  20. cdn_xj

    Overland XJ Build. Not my first Rodeo.....(video included)

    An alternative would be to route the breather hoses all the way up to the snorkle intake. For this, rather than running them through the airbox and snorkle, it would probably be easier (and more adviseable) to route them up the firewall and out through either the cowl or the driver's front...
Top