Lol, actually I already wheeled her on the maiden voyage climbing to the top of Round Butte near Madras, OR for the eclipse. Best part it was pitch black. We took a wrong turn and had to turn around on the fire road. Switched it 4wd climbed up the embankment and we were turned around.
Oh...
I do plan on weighing it once I have a bit more time. Truck is rated at 30k lbs. my guess is closer to 16 to 20 when I am finished fully loaded. Just curious I am seein newer jeep wranglers that look like they weigh 30k with all the bumpers and dodads. My CUCV sold today so a bit of mixed...
Yes, an Allison 2000. I honestly couldn't believe the harmogengy of the power train. I laughed at the fact it's a ford chasis, a mostly dodge known engine, and the Allison trans. I figured I had a dodge, ford and chevy all wrapped in one package.
I wasn't sold on a ford with a 6.0. The...
I also researched the LMTV. I really didnt want to hassle changing gears and I read reports of reliability concerns. The prices and distance to get a resonably priced one eliminated them from my list. They are great rigs.
The built subframe is stronger than the actual camper. The camper will fly apart way before the pressure treated lumber would. I had metal ready to go but figured after looking at the overall goal this exceeds the requirements.
Well, I all started back in July on an impromtu mini vacation with fiance and friends to go to Vegas. I also recently purchased a nice vw powered sandrail. My Ambulance has matured to the point I really didn't have any asperations to do more. I still love that truck but I was craving a new...
I am offering up one of only a few completed M1010's into campers around. This truck has been a labor of love.
Sold
Here are the Specs,
1984 Chevrolet Military CUCV M1010 Ambulance 20797 miles
6.2 Detroit Diesel w/Banks Turbo
Transmission TH400
Gear Vendors Overdrive
Skyjacker Suspension...
On the gen II ignition switch remove it from the truck. Carefully unclip the white cover. You will see 2 copper plates that are stacked together. Take the one off and clean the raised portions with sandpaper or emery cloth to remove the carbon build up. You will need to clean both plates...
this pertains to CA only. If a smog station in California says you won't pass because your readiness monitors are not set, ask them to check appendix J or Smog Check OBD II Reference (Testability Issues)
(formerly known as APPENDIX J) tell them to scroll down to the mitsubishi sections. Listed...
I just programmed the remote pictured in previous post. It is a GOH-24. If you have the little red light on the left of the dash that is a dealer installed accessory. Here is the way I programed mine a week ago.
1. Turn the ignition key to the "ON" position.
2. Open the driver's door...
When I replaced the injection pump I left one line loose and found the truck was belching white smoke at idle out of that side exhaust pipe even after i tightened the line. I replaced the injector and it was ok. I also found climbing grades pre turbo I would leave a white cloud of smoke under...
Good deal, I was holding out for a new unit from Amazon. Got an email from Amazon saying it was for sale 2k and by the time I checked it was sold. The used one I got the guy cut the crossover pipe in a place I couldn't weld back together. After a few emails back and forth he refunded me...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.