I've run through several stoves; a couple of Jet boil, MSR dragonfly, a few Coleman, Camp Chef and partner steel.
The ones that I kept:
- Partner Steel (primary)
- MSR as backup and water heating device. Sometimes you don't need to cook a meal.
Both of the above travel with me on outings.
I took the regulator side (hose assy) to the Depot and couldn't find a match. Hopeful the some one sees this post and says "oh I used a ooof and poofal 375 fitting"... but yeah next is getting some thread measuring going.
As you likely know the PS stove has a non-standard fitting on the input of the stove... I want to make mine right angle but a quick look at home deport for fittings has been short. Has anyone here done such an adapter on their PS stove?
the threads look to be 5/8
I didnt read all the posts here but man what a bunch of curmudgeons on the first page...
Family of 4 - Stock LC with good tires plus off-road trailer goes everywhere. Get a 100 series for better on road comfort and dual AC over the 80 series.
Group 31 via slee tray - though you can do it without the slee part.
Look at the photos in my article - LX470 with factory clamp in there somewhere.
Yes your phone uses Assisted-GPS (AGPS). The cellular network cell sites locations are precisely known and provide additional reference to augment the raw GPS data. Very much like the heavy equipment discussed above but on a much larger scale.
This can def happen, esp if you are running a protective case. Pull it down and run AC air on it or at least run defrost vent cold air to help it :-)
I only had it happen twice in 5 years but my newer mounting setup, where the radio lives, has not had issue.
And for those with iPad questions -...