Search results

  1. macca4802

    NPS300_TRUK camper progress

    I've done a lot of hunting around for the pop top sleeve. I'm not ready for sleeve just yet but have made initial contact with http://cuttingedgecanvas.com.au/pop-tops/. They 'seam' (sorry couldn't help it) easy to deal with. I'll just send my dimensions etc and they'll make them up and send...
  2. macca4802

    NPS300_TRUK camper progress

    Keen to see a picture of your sleeve and lighting. I had conduits put in my roof panel to suit location of lights. Was tricky, as you say, to run cable. All done now and tested. Between the top of the wall and the roof I thought I'd run my cables in a length of flex which will be contained...
  3. macca4802

    NPS300_TRUK camper progress

    The roof's on. Starting plumbing and wiring. What a mess!
  4. macca4802

    NPS travel truck build

    I only used the Raptor paint on exterior panels for some scratch resistance. I haven't painted under the cab.
  5. macca4802

    NPS travel truck build

    Nice work. Love the Raptor paint. Used it on my camper too. Check out my build on Instagram nps300_truk. Cheers.
  6. macca4802

    NPS300_TRUK camper progress

    Thanks Wyuna - I'll check em out.
  7. macca4802

    NPS300_TRUK camper progress

    Hi, After much research this is the roof extrusion I'm using. https://styromax.com.au/products/styropop-top/. Styromax make a good product.
  8. macca4802

    NPS300_TRUK camper progress

    Yeh it's a pop top. 500 lift. gas strut assisted scissor lifts. Just trying to decide what solar panels to fit.
  9. macca4802

    NPS300_TRUK camper progress

    Basically finished the outside now. About to start assembling the roof.
  10. macca4802

    NPS300 Wiring Diagram

    I'll do something similar. Thanks heaps. Macca.
  11. macca4802

    NPS300 Wiring Diagram

    Suspected there may be a problem taking off one battery. Thanks for the advice. Macca
  12. macca4802

    NPS300 Wiring Diagram

    Hi Bris31. Great idea. think I'll do the same. Did you just run 12v from one battery? or 24v from both? Cheers. Macca.
  13. macca4802

    NPS300 Wiring Diagram

    Hi Steve, I put a second OEM 140L tank on passenger side with a 'Pollak' Fuel Selector Valve. A second tank gauge isn't required as the switch handles all that. All pretty easy to pipe up and wire up. If I can't find a spare +ve behind the dash i might run another supply up from battery. Thanks...
  14. macca4802

    NPS300 Wiring Diagram

    Geday. My first post here after looking around for a while now. Bought myself a new 2016 NPS300 cab chassis and building a camper for the back. I'm wanting to put a switch on the dash to swap between 2 fuel tanks so I need a power supply to the switch. There are a few unused plugs floating...
Top