Squarestream

Andrew_S

Observer
I'm going to keep this relatively short, full build can be found here - https://expeditionportal.com/forum/threads/1986-gmc-s-15.175189/

The wife and I camped in our canopy for two years and always wanted a bit more space but also wanted to maintain the minimal size.
So began the plan/dream of doing our own thing.

The want list for the new canopy was;
-stand up in it
-sit up in bed
-big bed
-No making the bed, always set up
-4 season camping, insulated w/heater
-quick and dirty, by this I mean set up in like 60 seconds, no packing, unpacking moving stuff etc.
-bare bones, build it as we need it
-take an absolute ******** kicking on the back roads
-Light, sub 400lbs, this was a big deal because our platform is not a beefy one-ton
-Don't loose the ability to use the truck, aka fit a moose in the bed without issue
-Keep costs Lowish,


So I borrowed a radial arm saw from a buddy and bought a spool gun and just simply got started.

We started by building a frame off the bed rails out of 2x3 aluminum angle

49767066556_f03f40df4b_c.jpg



Then the main frame for the canopy on top of that,
49786929872_d18593eecc_c.jpg


49786601961_da845a1648_c.jpg


The rough idea was a box on top of a box. 3 flip up walls would fill in the cab over portion.
So after a trial fit we started on the top box.
49888781741_051f38117e_c.jpg


49889089767_522ddefedf_c.jpg


Both top and bottom box coming along, started on the pop up walls
49907270206_952672fa1e_c.jpg


We wanted the topper to function like a canopy with two doors that would open just the same way. Once I wrapped my head around how I wanted to do this I got started.
49926212441_6003888860_c.jpg


Trying out the bed for the first time.
49926507717_3c26919cc7_c.jpg


Starting to actually look like a canopy.
49925704883_2606bdde85_c.jpg


We repurposed canopy windows which fit right inline with our budget.
49953681453_72bdce21be_c.jpg


First trial fit on the truck
49965048463_d639cbcfb9_c.jpg


49965048148_f49b6f84b0_c.jpg
 
Last edited:

Andrew_S

Observer
Tailgate progress
50004071487_79a79bd76e_c.jpg



Sheeting was a big milestone.
50036154417_352a5ee607_c.jpg


50035345113_978d662c2d_c.jpg


Flip up walls complete w/ drip edges.
50065528251_c53e8719d8_c.jpg


Tailgates wrapping up
50064971453_40fef46c97_c.jpg


50065017203_76e37a95f0_c.jpg


50064971533_6f8a1d7bc2_c.jpg


Topbox almost complete
50067371811_a237e52801_c.jpg


After drilling 600+ holes into the canopy for rivets we naturally had some concerns about leaks. Sika 221 is an amazing product.
50081737621_6a5618ef95_c.jpg


Insulating
50081983917_48c6efc36b_c.jpg


How to effectively lift this unit was like the monster in the back of my brain for quite some time during the build. I fully intended on using heavy gas springs the entire build. Up until I saw this amazing trailer w/ roof top tent powered by actuators. 30 mins into reading about the build I was dead set this was the way to go. One of the best decisions of the entire build.
50095669028_fbb50fe315_c.jpg


The sleeping area accommodates a fullsize queen bed perfectly.
50117849822_5eb5b89f50_c.jpg


Struts for the gates
50161310487_37afcf76c1_c.jpg


Tie downs and sliders for our Grumman
50161048226_e89be530f7_c.jpg


Testing the actuators w/ canoe.
50161048171_535a774fe2_c.jpg



A plate to stabilize & support the cabover portion and also for lights.
50178886977_797e167d16_c.jpg


50190625296_0eb66804fa_c.jpg


Panel for all the fancy stuff
50178886967_efd1643a60_c.jpg


Up and on the truck
50194110636_f0583db844_c.jpg


First time out in the wild
50194372307_bcd9ff4db3_c.jpg


Video of popping it up
 
Last edited:

Andrew_S

Observer
First trip and night sleeping in it!
50238737311_2e75074f65_c.jpg


Backed that up with the an 800km 4 night trip
50264714688_8581e3a378_c.jpg


50265710597_0bfcb2ee41_c.jpg


50265572077_d5c85dbd2a_c.jpg


Then another 5 night trip. We are totally in love with the new set up. Quick easy set up, no hassle, just push a button and flip 3 walls.
50328812361_0bb83f70c0_c.jpg


The actuators make removing it from the bed so easy. Back in, lift the top, tie it off, undo the clamps and then retract them and that's all it takes.
50365401578_df0fdb3883_c.jpg


50366097156_3649ec5ce4_c.jpg


The next big thing was the planar diesel heater courtesy of Expedition Upfitter.
50246981192_7d9bb3015c_c.jpg


50366262257_9a7093ec7c_c.jpg


50366098726_474d80b989_c.jpg


50366255612_d4f6a9bff4_c.jpg



and that catches it up to just about now.


I really drew a lot of inspiration from build threads in here. OVRLND campers make absolutely extraordinary stuff and if I hadn't stumbled across their thread in here this wouldn't have come to fruition. I would love to see a bigger company adopt a design similar to this and start producing it. That way if anything ever happens to this truck or topper I don't friggin have to do this again.

All said and done we ended up around 4k on our budget, that includes diesel heater, actuators, windows, aluminum etc etc. The camper came in right at 400ish lbs.

My hat is really off to anyone who takes on their own build and all of the manufacturers who design, fab and produce campers. I previously thought campers were so over priced and that mindset has completely shifted. To build something once is one thing, to be able to reproduce it over and over again and stand behind it is something entirely different.
 

Andrew_S

Observer
Thanks for the good words guys.

Wild! Came out so nice, congrats. If you're ever in Flagstaff we'd love to see it!

Man that really means a lot coming from you. The product you guys put out is mind blowing and was the true inspiration for this build. As I previously mentioned, the amount of time it takes to design and produce one of those units is unreal. Then to stand behind that product when it gets ******** kicked on backroads, that would keep me up at night. I appreciate the invite and I might take you up on that when we do a trip we've been planning down south.

Made some more progress today.

Mounted up the pedestal
50383636028_b32e8f1394_c.jpg


Next up was the fuel tank. Started by cutting down the supplied brackets.

50383636108_9b04088005_c.jpg



Spaced it 1/4" off the wall and fully insulated the mounts with 1/16" rubber sheet.
50384325821_0b7b4feacf_c.jpg


I decided to use these flush mount sailboat style exhaust fittings so that the pop top will still function properly.

50384333211_8e66e05a3e_c.jpg




Intake and exhaust complete
50384520622_d19ee15aa9_c.jpg




Made 4 of these up for better hangers off the roof
50384325916_e667d7fa4c_c.jpg


Makes loading/unloading even simpler.
50384326011_992d067b47_c.jpg


Last project of the day was a step to get in and out of bed
50383644683_13ba81f701_c.jpg


Really productive day. Just need to shorten the fuel pump and main power harness for the Planar and it's complete.
50383636163_ed9abeb073_c.jpg
 
Last edited:

llamalander

Well-known member
Thats some nice clean work!
What I really envy is you being able to work on it without the truck in your way-
I would have 6 more knees still on my jeans if I was set up like that.

You're moving fast, this is a fun build to watch, keep on posting.
 

DzlToy

Explorer
Paging Alaskan, FWC and several others. Stop building $40,000 slide in truck campers that weigh 3,000 pounds. This guy just kicked **************** with a welder and some tubing in his garage.

Using sandwich panels would save some weight and a LOT of welding/riveting. Kudos to you for getting stuck in man.

P.S. The black and red S-10 is super clean.
 

Ark

Member
Excellent build!

I really like your Alaskan Camper style flip-up cabover panels. This is the first unit I've seen that uses those other than AK Campers. Seems like a really great way to make a low profile camper that is still quiet in wind. Well done
 

Andrew_S

Observer
Thanks for the good words guys.

WoW! I just built mine out of plywood. Questioning my existence.

Sent from my LM-K300 using Tapatalk
Thats an awesome looking rig. I really like the way you set up your heater.

Paging Alaskan, FWC and several others. Stop building $40,000 slide in truck campers that weigh 3,000 pounds. This guy just kicked **************** with a welder and some tubing in his garage.

Using sandwich panels would save some weight and a LOT of welding/riveting. Kudos to you for getting stuck in man.

P.S. The black and red S-10 is super clean.


I looked into sandwich panels, definitely would have saved some weight. Also not dealing with the thermal bridging from the aluminum would have been key. The cost and availability were factors that turned me away though.




Just got back from another 5 day hunting trip. We got our first taste of snow and cold weather. Here are some pics.

50470943012_ee5a2eef6d_c.jpg


50469962908_02a6a13c35_c.jpg


50470645571_dbeec4e475_c.jpg


50470661141_0373ebf722_c.jpg


The only thing not up to the task was this garbage motorcraft battery (literally pulled out of the garbage at work). The battery took a charge and tested fine but after 5 days of minimal diesel heater use it wasn't up to the task. So I purchased this 85 amp hour agm and quality monitor to upgrade the system. Also looking into an isolator and vehicle charging the second battery while driving currently.

50482057142_eaa734a1dd_c.jpg
 

Ducstrom

Well-known member
How did you go 5 days with the diesel heater? Must have been very minimal usage.
I have a webasto air heater in mine and I get about 2.5 days before I am down to 50% on a new 105ah AGM.
I run it about 8-10 hours a night. Over night temps have been around -5C.
Only other thing I am running is a few LED lights and a DC fridge.

I've got the same Victron monitor, it's pretty nice.

I'll be going to a couple of lithiums in the future to stretch out our time disconnected. I'd like to be able to go 5-6 days in the winter without having to recharge
 

Buddha.

Finally in expo white.
An isolated dual battery system sounds like a good idea. Can you mount that AGM battery under the hood? Also I’m not sure about the 2.8 trucks, I had a few of the later 2.2/4.3 trucks. On those trucks you could cut the rounded corner off the battery tray and fit a battery that was bigger. Also on the 4.3 trucks you could grab an alternator and serpentine belt(1” longer) from a full size truck which got you the physically bigger alternator that made its power at lower rpms, supposedly.
 

Forum statistics

Threads
185,527
Messages
2,875,546
Members
224,922
Latest member
Randy Towles
Top