Lets see some full size pictures...

mekcanix

Camper
My Wife and I decided to social distance by getting out of the city and away from people this past good Friday. We went to a camp ground to check it out as we had never been there before. The road there was a bit dicey when we hit the dirt road as parts where thawed out and badly rutted and soft, did I mention soft! Well we had a couple of moments of oh crap maybe this wasn't a great idea, but got though it. I will add as we were leaving a suburban of the same vintage as my truck came down the same road we had come down 2 hours earlier. My first thought was damn I cant drive!! When we left we found that the road after being in the sun for a few hours was much easier to drive back on. So this place is in the south east corner of Manitoba, And across the ice behind the truck is Minnesota. I just had to get my better half out of the house she is got bad cabin fever. In Manitoba the parks are still open but facilities are closed. It took 30$ to wash the road mud off the truck the next day, it was like cement and freakin heavy! I will add the truck is sitting on a 3" level with AAL in the back added on 33" duratracks with a winch behind the front bumper, so I could have extracted it from most of the issues
have a great day folks and stay well
Birch point 3.jpg
 

Regcabguy

Oil eater.
Just installed a Camburg bumper, Warn winch, and Rocky Road Outfitters Full Cover Sliders.
400955198b043620a1d44aebe0c48e88.jpg

e8ba9acb2e22bc9c979cf18152d1fdb9.jpg
13342f472d36fdb935aec4a8b4c8b804.jpg
Nice bumper. No fat lip like the ARB's and others. Ditto with the sliders.
 

bullpengarage

New member
Just finished converting the shop's 2013 Raptor from a desert runner platform to overlanding. Ended up deciding on a Leitner Designs ACS Forged Rack with Gear Pods and Universal mounts, as well as their traction board mounts that are meant for Maxtrax, but work with the TRED HD boards that I have due to the shorter length. Also picked up the new Freespirit Recreation Odyssey 55 RTT. Completed the rear setup with a drawer system from Decked. Very pleased with the end result!
 

Attachments

  • ol1.jpg
    ol1.jpg
    374.5 KB · Views: 138
  • ol2.jpg
    ol2.jpg
    332.4 KB · Views: 142
  • ol4.jpg
    ol4.jpg
    130.1 KB · Views: 143
  • ol5.jpg
    ol5.jpg
    411.3 KB · Views: 156
  • ol6.jpg
    ol6.jpg
    415 KB · Views: 165
  • ol9.jpg
    ol9.jpg
    150 KB · Views: 164

landman

Well-known member
Just finished converting the shop's 2013 Raptor from a desert runner platform to overlanding. Ended up deciding on a Leitner Designs ACS Forged Rack with Gear Pods and Universal mounts, as well as their traction board mounts that are meant for Maxtrax, but work with the TRED HD boards that I have due to the shorter length. Also picked up the new Freespirit Recreation Odyssey 55 RTT. Completed the rear setup with a drawer system from Decked. Very pleased with the end result!

Great looking setup! I love that area you are camped in on the north side of the Catalinas! I got there often.
 

landman

Well-known member

Heavyhoe02

New member
02 tahoe and 02 2500hd everything built by myself
Hello I have a a small (1guy) Fab shop in Carson City NV and this is my project “Junk in da Trunk”. 87 sub ,350 efi, d60/14b, and a bunch of stuff I’ve made. Still a work in progress but it seems they all are that way.
e3cdba014bfc3e15bbf796c68027475f.jpg
3ceb1c2e22b55f17cfa89c9372265300.jpg
0ce622338481bab4671287c874c2f53f.jpg
b202ddb1e64aade832178b5c6aeb8539.jpg
a25dae13a40a1baa7e1455aeabbff71f.jpg
2c9f49c766365f6fd8991b0c1ef5b265.jpg
a40606309836a5f563a3bdae766ade73.jpg



Sent from my iPhone using Tapatalk
************ burban man, strong work
 

Forum statistics

Threads
185,530
Messages
2,875,579
Members
224,922
Latest member
Randy Towles
Top