Hey ITTOG,
Thanks for your comments and question.
Yes, that was part of the initial round of trying to match the front fenders exactly/as close as I could.
Increasing the width of the back fenders any more than 1-1/4" to 1-1/2"s looked super funky as they: overhung the back tires too much...
Carbon Fiber Rear Fenders for Camper - Shaping Core Material
I was originally going to try and make the rear fenders match the front baja fenders exactly-ish, but they just looked weird, like caca poopy :poop:. I decided to incorporate some of the basic design elements off of the front baja...
Carbon Fiber Fairing/Skirt for Camper - Passenger Side Rear - Dry Fitting
It's crazy how close/even the bottom edge of the step box is with the meeting point in the contour of the fairing/factory rocker panel contour and the top edge of the electric steps is with the point/location it...
Carbon Fiber Fairing/Skirt for Camper - Passenger Side Rear - Demolding & Part
Initial cure complete and time to start breaking sh(smiley face)it......... CAREFULLY! 🤣
Here we go............. :devilish:🤠💪🤟
Finished and shaped part
The little 1/8" high black HDPE spacers worked well
Carbon Fiber Fairing/Skirt for Camper - Passenger Side Rear - Mold Making - Continued......
The fun is just beginning :love:.
Rebuilding a top section for the mold, figuring out the best way to bond this little piece onto the main mold section and Gitten Er Done.
Bonding another stringer...
Carbon Fiber Fairing/Skirt for Camper - Passenger Side Rear - Mold Making
This mold was a bit more complicated than the others and it took a bit more time to get completed. I felt like it was fighting me the whole time, or maybe I was fighting it since it is the last mold/fairing and I'm...
Hey Tony!
Build progress coming right up in a few minutes! Thanks for your interest in the build thread/progress :).
Yah, Wild's has been a bit of a God Send for me on this project. His boats are super clean and his build is Bonkers (how well everything came out)! I won't make the two-year...
Hey Christian,
Thanks for your response and for taking the time!
It's nice to know my words were heard.
Light :love:! Hopefully when this thing comes back from paint/coating, I will get an extra shot of light/energy to boost me to the finish line.
Thanks again!
Carbon Fiber Rear Fender for Camper - Drivers Side Rear
While taking a break from the fairing/skirts, I also started designing and templating the rear fenders. It is going to be a little tricky to give them some thickness while also tying the bottom side of them back into the fairings without...
Carbon Fiber Fairing/Skirt for Camper - Drivers Side Rear - Dry Fitting
I'm surprised how well the lines are matching up and how clean everything is coming out.
Here is what the removable back wheel well blank off piece will somewhat look like (will span the entire width of the wheel...
Carbon Fiber Fairing/Skirt for Camper - Drivers Side Rear
I'm getting closer to having these thing done 🤩🥳😝🤪🙃😎
Shaped and contoured
I think I already mentioned that the bottom and inside back flanges/edges (1") are designed to receive bottom panels and a back panel to enclose/insulate the...