If you are going to use a Garmin USB receiver then you'll need a translator if you are also using NG TOPO! State; I use GpsGate and it not only works great, it is very easy to setup and get going.
Here's a link to my system.
******** :jump:
Ok, so humor me on this. Are these little fish even gutted prior to putting them in the can? Cause if they aren't then that means the poop shoot and everything is still in them little fishies.
That's a hoot!! My wife and I thought the exact same thing and actually "fixed" it so we won't have anymore than the 3 that we have now. Here's our current setup and it works great for our family of 5; kids are currently girl:9, girl:7 and boy:4.
I couldn't agree more with what SHOGUN has outlined above.
We are a family of 5 and purchased the ARB 50QT last year just prior to our Lolo Motorway/McGruder Corridor trip in Aug. '09. The trip was 10 days and we planned our time and location so that after 5 days we could restock.
It was quite...
I ended up leaving the previous bushing in place because it didn't look like it was bad. However, when I wiggle the steering wheel, I still have a tiny bit of slop. But I drove it around and on the freeway and it's much, much better than it was previously. Maybe I'll get the urge to unbolt the...
You seem to know your way around just fine. You are exactly correct about a std. bolt fitting tightly in the hole. I got the 1/4" replacement pieces built today and a 9/16" bolt fits perfectly (not a press fit) in the RE bushing sleeve. Zero slop.
I built a front and a back repair piece that...
Thanks for the links. I knew there were people who'd seen what others have done. That's one of the reasons why this site is so cool! Many brains are much better than just one.
Guess what my next project is.
Hello-
I have an '08 Jeep Wrangler Unlimited with the 4-1/2" Rubicon Express long arm lift; the lift has been on the Jeep since 300 miles and the Jeep now has 15,700 miles. I recently noticed a slop in the steering and upon further inspection found that it was coming from the track bar. The...
Project is complete!
I’m happy to report that I was able to find the time to finish this project yesterday (Sat.). I ordered and received the 200A Power Gate from Perfect Switch. I’ll also mention that I got superb service from Scott on the phone, and after placing the order I had the switch 2...
Another phase in the record books.
Another phase is in the books. Today I finished all the wiring for the accessories to include the PIAA lights, Lind adapter (for laptop), yellow accessory wire to the trailer, 12V accessory plug to the rear, and I even moved the CB onto the new fuse panel...