Don't have tons to add but
a supply of spare fuzes
a small spool of electrical wire
a few zipties
a small assortment of crimp on connectors
some electrical tape
Oh yes and if you're going to carry a First-aid kit I would suggest a Wilderness Frist-aid course. The basic course is 16 hours and...
From the research I've done on coolers the shortcoming of most of the high end coolers is that although they have 2" of insulation on the sides and lid they only have 1" of insulation on the bottom. Being that any chain is only as storng as it's weakest link; the 1" bottoms seems to be enough to...
I've seen your build thread before and it gave me several ideas; also seen the video before; very nice job.
What stroke length struts did you use and what weigth rating?
Never thought of putting a blanket between the tent and the fly; I'll have to try that to see how it works. In cold weather I do normally put two blankets down on the floor of the tent and I do use a small 3/4 length pad. During colder weather I have a couple of bag liners one is fleece the...
Curious about this too. I haven't extended my tongue yet but right now my plans are to build and adjustable tongue that will extend from 18 to 30 inches. I wheel some pretty tight trails so being able to shorten the extension to 18 inches from stock lunette mounting surface should help on those...
I put mine in my 416 trailer while traveling and pull it out and put it about 50 feet (I use a 50 ft extension cord) away from the campsite when I make camp. Quieter that way; 50 feet makes all the difference in the world.
I'm in the proccess of designing an adjustable rack for my M-416 so that I can get my RRT below the slipstream while driving. I'm curious, how do you raise and lower your rack? Did you use slip joints in the corners to prevent binding during raising and lowering?
EDIT: also how did you deal...
Was thinking of a duel purpose solution that would do both on and off road so that I could replace my netbook with something smaller and easier to use.
Sorry I'll have to pass on this but GLWS
Here are a couple of related ideas that I thought might be interesting
http://www.youtube.com/watch?v=61YszGZICVo&feature=player_embedded
http://www.instructables.com/id/Field-Sink/
http://nwoverland.org/Discussions/tabid/166/aft/23250/Default.aspx