Recent content by The_Goob

  1. The_Goob

    My adventures from S.M.O.R.R.

    Recently finished my jeep build and drove 8 hours to wheel at smorr, I have made quite a few videos of the action but ill but the best ones here. There's a playlist if you'd like to check out the others. This is day 1 here just getting the feel for things and shaking it down Here is the...
  2. The_Goob

    m101a1 Build for my YJ

    Ok so it took me longer than expected but I finally finished the Jeep and took it out for a beatdown/shakedown and it did great. Its finally time to pull the trailer out of the weeds and get started! This first one I do im not sure if I will keep it or sell it, I want a 416 for the yj but this...
  3. The_Goob

    First drive of my YJ build!

    Thanks! its got a lot to dial in still but im getting there!
  4. The_Goob

    First drive of my YJ build!

    Its been a long winter and spring swapping axles and lots of other things on my YJ. This jeep was highly modified before I started but I decided to redo most of it. I made a video(below) of the test drive, but ive done alot of vids of the build, check out my channel here...
  5. The_Goob

    Made a Winch Enclosure / mount for free on my trailer!

    Used my old Jeep winch(which was free), random shipping brackets and steel I scavenged, and an aluminum box (that used to be my strap box on old trailer). Its not big enough to house my yellow top but I think I will just run a harness from truck. I think it turned out pretty cool and keeps it...
  6. The_Goob

    Great tool for building your own parts for your rig

    I did a bunch of mods to my harbor freight press and recently added the swag offroad finger brake, this thing is great for building your own brackets and whatnot if you are the build instead of buy type like me
  7. The_Goob

    How to: Re-center H1/humvee wheels, its not that hard

    Anyway I got around to finishing them, here is part 2
  8. The_Goob

    How to: Re-center H1/humvee wheels, its not that hard

    Im running the humvee 37s the MT/R ones, I have 3 of the BFG baja ones also for my m101 and spare but those are just on regular wheels
  9. The_Goob

    How to: Re-center H1/humvee wheels, its not that hard

    So I bought h1's and mil 37s and decided to tackle re centering them myself, and recorded it for all 7 people out there considering doing the same. Enjoy! [
  10. The_Goob

    H1 wheel and tire removal the easy way

    So I'm selling the 24 bolt h1s and getting the 12 bolt DIY kit from TWF. So I had to get creative to get my tires off the 24 bolt wheels. Figured id share the process.
  11. The_Goob

    Make your own hood vents for free

    Awhile back I made my own hood vents due to high under hood temps, sometimes inducing vapor lock. And I was too cheap to buy a hood louvre. Recently I made this video showing how I did it. Keep in mind its an old 91 Jeep YJ that lives in a garage when not being used, water intrusion is a thing...
  12. The_Goob

    m101a1 Build for my YJ

    Next up installing ox locker then throwing it back in jeep
  13. The_Goob

    m101a1 Build for my YJ

    No I will be building a rack with a RTT. Unfortunately I have to finish my jeep project before I can get moving on this so maybe I was a bit preemptive starting the thread. I can however post a few pics of what Im doing to the jeep.
  14. The_Goob

    m101a1 Build for my YJ

    its getting 3/4 ton axles with 5.13 gears itll be fine haha. 4 wheel disc brakes and a bit of suspension stretch. elec brakes on the trailer. and the weight will go down when i swap out the stock boat anchor axle. I also have a 4x4 09 Silverado that I will occasionally use to pull it(when I want...
Top