Recent content by Stoffregen Motorsports

  1. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    Finished tank install with hoses and wiring. The tank itself was not the nicest part I have ever seen. It had angle iron welded onto the sides as frame brackets, the welds were sharp in spots (which bugs the heck out of me) and the filler neck was welded on crooked. Oh, and the oil-canning of...
  2. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    Finding a fuel tank that fits a Jeepster is not easy. As far as I know, there is only one aftermarket, non-original design for this frame. I did some research and talked to Genright about their YJ and CJ tanks, but none of them would fit without mods. Parts Dude sells a fabricated steel...
  3. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    Next up - exhaust system. I was dead set on having a side exit exhaust. It just felt right. But packaging it was posing some pretty large problems. A - I didn't want this Jeep to be too loud, and B - the chosen muffler was so long that I was going to have to pull out my can of woop-ass to get...
  4. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    Here are the finished panels. Powder coated and polished.
  5. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    Patience and low heat. I try to use hole punches when possible. Packaging is key to many systems, and with wiring, it's doubly tricky with circuits running all over the place. Thank you!
  6. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    Remember the center dash portion that I cut out and modified? It needed a filler trim panel, and again, I was waiting for some great idea to hit me. And it did. I have been holding onto a sheet of finely corrugated steel for many years, hoping to find the perfect use for it, and the perfect use...
  7. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    For the gauges, I really didn't have any ideas as to how to mount them, but when in doubt, try to match something else going on nearby. A couple hours spent whittling away on the old manual mill produced a clean looking gauge panel that closely resembles the panel on which the switches are...
  8. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    Thank you for waiting. Posting on social media takes valuable time out of the day, and I tend to bank it so I can catch up all at once. I know. Not the right way, but it's all I got... More pics. Here is the passenger side defroster duct. The original duct hit the A/C unit, so I made a new one...
  9. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    Todd, the mounting plate came from Parts Mike, and is meant for a YJ (I think). I had to modify the frame to get it to work. The pump is stock GM LS3. On heavier vehicles, they could use a boost, but on this light Jeep, it's finger light. Thank you.
  10. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    I insist that all systems be removable from the vehicle, and wiring with that in mind means separating body wiring from engine wiring, and critical placement of connectors. Obviously the grommets and firewall boots need to be large enough for those connectors to pass through. I had planned ahead...
  11. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    With almost all of the hard parts installed, attention was turned to the electrical. Using a "Highway 15 Plus" wiring kit from American Autowire, I started at the fuse panel and worked my way out. Easy stuff first, like headlights and turn signals. The engine control system is pretty much plug...
  12. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    To cool the LS3, we needed a large fan, but again, space was limited. Here is what we came up with.
  13. Stoffregen Motorsports

    Jeepster Commando Build - A Different Sort of Jeep Thing - Stoffregen Motorsports

    So much has happened in the past few weeks. I admit, this project has taken a long time to get where it is now. Every small decision turns into a hunt for the right part, then waiting for the part, and eventually having to modify the part because it doesn't fit as expected. It's par for the...
  14. Stoffregen Motorsports

    Jeep Cherokee Widetrack Revival - with questions for the experts - Stoffregen Motorsports

    Blues Brothers - so many good movie quotes there.
Top