Recent content by jydog

I bought this a while back and did not complete the project. Has a little surface rust $500 + shipping or pickup in Griffin GA Part#: CK001 Desc: This is the UJOR 4wd van spring hanger kit. Includes front spring hangers & sleeves, frame shackle sleeves & bushings, shackles, complete hardware...

Is there any chance your shock valving is not longer applicable to your setup? I know I put a set of heavy duty RV shocks on the rear of my first 4x4 van and it road like a rock. Every bump you hit would send the rear passengers flying. I switched to some applicable bilstein shocks and it was...

Thanks for the shoutout Jb1rd. That is where I am currently stuck going from a cutaway that never had power windows the wiring does not exist in the dash so I will have to swap out the dash harness for one that does or custom build a harness. Not on my priority list right now but I will...

Great build. Thanks for sharing your experience with us. This is the first king pin 60 i've seen someone document building under an econoline.

Jsweezy, it's perfect for 2 people but I am a little leary about transporting a family of 3 in it since one of us would have to ride in the back. Just FYI. I wish I had thought more about that before I started building it. I guess it wouldn't be a whole lot different than a standard sticks and...

trying not to hijack this thread but since we are talking box trucks that's my plan for this one. https://www.youtube.com/playlist?list=PL4M7OaDVwdt8pntziztlg-svIzxZKbc0U If I were to start it over again I might have started with a short bus. It might be safer to transport more than 2 people.

You also would't have to worry about cutting the fuel tank it's mounted in the rear.

Looks like several people have allready supercharged an Econoline. https://youtu.be/4QrjWuFW4Ug https://youtu.be/JJEYmjZ1UGk https://youtu.be/gps6MHRcvV0

Here is what I did https://youtu.be/jyQamFutvXM

Working on the cabinets https://youtu.be/P7VG0zEnVXY

Hey guys check out my Box camper van build in progress and let me know what you think. The latest video. https://youtu.be/nqSHX7HGOl8 Link to all of the videos in my playlist. https://www.youtube.com/playlist?list=PL4M7OaDVwdt8pntziztlg-svIzxZKbc0U

Here is mine in progress. Its a 2006 E350 with a 10ft BOX. Subscribe here to keep up with the progress https://www.youtube.com/playlist?list=PL4M7OaDVwdt8pntziztlg-svIzxZKbc0U

Thanks for those pictures mgmetalworks, got to hand it to Ramsey. That is a factory looking setup. From what I hear it handles better than factory. I have even more questions now. Steering arm looks a lot longer than any e-series I have seen. I wonder what it is sourced from? Is that 3/16 steel...

Let me start off by saying your rig is awesome and the inspiration for me building one. Im doing it the hard way though piece by piece and 5.4 instead of the 6.0. here a link to my progress if you want to take a look...