Recent content by jmkoz

Hi, You may find some answers in this post from the Australian owners club (AGOA). John

Maybe also try asking the Australian guys who have this vehicle, There are quite a few cab/chassis owners on the AGOA forum John

No great problems packing up it is just a little bulkier but not by much. John Sent from my HTC 2PS6200 using Tapatalk

I can't comment on your particular problem but I know that I have experienced condensation on cold and/or wet nights rather than leaks. After a while I wised up and bought the fly. Since then I haven't had the problem. The fly stays attached during pack-up but does take a little extra time to...

There is a manufacturer here in Australia (formerly in the US), Drifta, that is selling a larger and apparently improved bag for all sizes of Oztent plus a few other accessories. Lots of videos on their site on a whole range of stuff. I know that the products on eBay Australia as well - not sure...

There is an LS1 conversion on a long wheelbase here in Australia which is written up here on the AGOA forum. It may help. John

You are quite correct TCao (as was I)! Obviously above is from the video. Here is a clearer shot from a non-armoured Australian Defence Force (ADF) G-Wagen I hope that this helps clear it up. By the way these are no longer under test but are in use. I was fortunate to be out at MB...

These are actually a heavier duty Ashtaroth. To distinguish them, you will notice that where there are holes in the spokes of the standard Ashtaroths - the miltary versions are solid. here's the standard for comparison. John

The roofrack is not an ARB. It is a custom made alloy bar by Tradesman in Melbourne Australia. The vehicle pictured belongs to an AGOA member and is also fitted with Black Widow Storage Drawers. With reference to the question on the Winch Bar......We (AGOA) have tried to convince ARB to...

Only strange in that it is RHD. We have a lot of Japanese imports here in Australia - given that we also use RHD. Actually I shouldn't be surprised, One of our US expat members bought his Japanese import from Canada so they can get around. I look forward to reading about your conversion. John

Hi eltonz, Your truck looks good and if I'm not mistaken a Japanese import. It seems strange for Texas. Given your diesel transplant, you might also be interested in this post on the AGOA Forum. Good luck with your truck. John

While probably not available for rotopax you could use the idea and make one to suit. http://www.tanamipump.com.au/ John

Hi, A couple of things that I would do (if you haven't already) is to replace the valves in the lift pump housing (they come as a kit with the washers and are fairly cheap and relatively easy to do) and I would also be inclined to check the filter on the bottom of your fuel tank sender. Mine...

Grimbo, you are in the land of spare wheel sacks. Why when there are so many Australian versions of this product would you want to import one? - No offense intended to the Trasharoo which is obviously a very fine product but it would be like importing kangaroos to Australia. I guess the price is...

I don't use or endorse these units but I did think that it was a good idea from another Aussie company. I would need to find the space in my otherwise full garage though. Quickslide John