Recent content by jaleel_da_sheik

Bump: the disco is still on the market and awaiting its next adventure. Give me a shout if you have any questions. - Sheik

Lowly Update: As cabinetry component preparation continues the various 3D printed parts I've designed to integrate into the plywood cabinets were needing to be fabricated for test fitting purposes. Mount brackets for the two types of water filter wrenches: Mount bracket for the 50 micron...

Lowly Update: Part of the shop has been turned into a cabinet preparation workspace. The backside of a multitude of these components will need additional dados (the side that was faced down on the CNC router table). These will be achieved by layout drawings off the solid model, straight...

Lowly Update: Just back from another trip down the Grand Canyon and the CNC router was busy while I was away. A van full of 12mm and 18mm Baltic birch plywood pieces was waiting my return: Many of these parts need secondary operations (bevels on the table saw or blind slots on the back...

Sunroofs: front, no. rear, yes with no issues. not sure if they leak as the truck has been stored indoors since purchase. 3 Amigos: they've been dormant since I replaced the ABS modulator shuttle valve switch 4Lo: smooth all around - Sheik

Just back from a 20 day rafting trip through the Grand Canyon - apologies for any missed correspondence. The Disco is still for sale.

I do not know the mileage of the P38 engine before it was refurbed. - Sheik

A few more pictures of the DII's nether regions: - Sheik

Original posting edited to include additional information on the engine refurb by County Rove. - Sheik

I believe it is the Bahama Beige. - Sheik

The EMU kit is both front and rear. Air bags have been deleted. - Sheik

Lowly Update: Well, ExPo's thumbnails continued to poop their pants so I took the time to go back and swap out every thumbnail I've posted with its full sized image - not as easy to view with the included text, but hey, this is a free service so I can't complain too much. Lots of CAD work has...

Additional pictures: More pictures available upon request.

2004 Land Rover Discovery II Super clean inside and out. Ready for hauling kids to soccer practice -OR- better yet, kitting out as a cherry overland rig. ENGINE: Replaced original (slipped bearing in bottom end) with engine refurbished by County Rove in Portland, Oregon. Here's what they...

Lowly Update: Exterior electrical work completed on the habitat. 3D printed custom mounting caps for attaching perimeter lighting to the T-slot extrusions on the habitat's edges. Mounted them up and ran the wiring - was able to hide the wiring inside the caps for a clean look and no snag...