Recent content by FoMoCoMarc

I will be driving to West Virginia for a concert then straight up to Maine from there so it is not likely I will be traveling up that way, BUT you just never know! Thanks for the offer its very appreciated as I would to the same for anyone in my position. I haven't posted up in a while. I...

-Pulled about 4 billion staples out of the floor from the carpet. Glad thats over! -Got the bedroom ready for some new material to be installed -The cab got vacuumed and cleaned good -Got my dual truck batteries and isolator wired up with new cables.

Thanks everyone. It is the same height as the ac unit. The side windows slide open in the bedroom and I'm going to get some trucker fans to help with cooling. If down the road I decide to its not a big job to throw a vent in up there. I would just rather have the extra 3 inches of clearance...

It felt ok on the road. Keep in mind the top part of the over head is very light (fiberglass shell, lightweight foam insulation, and 1/4 inch plywood) I will be driving it home (Maine) from here in Laramie, WY with my girlfriend. Im leaving June 26th. No real plans other than hitting up a...

Took it for a drive and got the majority buffed.

Will have more to post soon.

Ok, so I have gotten some stuff done on the camper, not as much as I would have liked to but progress is being made. On to the Pictures (I like pictures better than words) Buffed some stuff. *:o Also found out what this thing is. CREGER 4x4 built by Champion home...

I plan on leaving it on the old chassis. I can work on it and its very stout. It will be like a vintage earth roamer.

I have found an ID tag inside the camper but have yet to make all of it out or take a picture of it. The highest point is just shy of 11'. And as for the cab over section..... yea :ylsmoke: (orbs were problably from the dust since I had just pulled up the plywood base for the bed before the...

I just picked this up last month and am in the process of getting it road/trail ready again. I don't know much about campers, RVs, or expedition vehicles so any information or product recommendations will be greatly appreciated. I am a broke college kid so this is being done on a VERY tight...