ebrabaek's latest activity

After a good wash and scrub, yesterday...... Today is top coat day.

Main entrance door swing.....

I thought I might as well spend some time while the THIX cures by scoring the surface with 800 grit abrasive pads. It will be washed...

Been a looooong road, or at least it feels like it but the box is ready for a wash down and then top coats, which means that next week...

An illustration of how abrasive the Kevlar/Aramid is. After trimming just the two pieces the saw blade went from looking like the one on...

One of the best things about making your own piece, is that you know how it is constructed, and how to improve and add things as you...

A bit of catch up here as were readying the ship for a quick hop to the Ozarks and back this Friday. Door striker plates bonded in...

Yeppers. I found that heavy-duty serrated shears will last the longest. Also the auto scissor that I used in the video earlier will work...

Absolutely. It is crazy really how resilient it is. Cutting through the pieces I made for the bracket, I wore through a high TPI metal...

So as I aforementioned you should always arrest the edges and corners when you cut Composite/foam construction. If you done and torque...

Snug out to the hanger for a couple of hors before the Lady's woke up.... Bwaaaaamuuuhahahaha. Latch hardware cut in half. Then...

Hardware was then trimmed. I need to prepare you to the land of K-39 Aramid (Kevlar) By just cutting this piece with a high TPI metal...

That is really cool. Unfortunately I cant add a much deeper perspective, but if you want to dive deep, I would encourage you to reach...

The Max Bond HTE is typically used in applications that is exposed to high heat. The 1618 is good up to around 250 deg, whereafter it...

Out of the oven now cooling down.... Then onwards to the Gas strut brackets. Here are the new hardware ready for trimming...