cph05a's latest activity

  • cph05a
    cph05a reacted to Fatboyz's post in the thread Got the start for my 550 build with Like Like.
    On the truck! 2 brackets to weld on the front, and the 1/4 plate to close in the back.
  • cph05a
    cph05a replied to the thread SRW 450 Mountain Build.
    Test fit of the upper portion of the camper on the truck. It's starting to look more like an expedition camper!
    • camper_progress_ontruck1.jpg
  • cph05a
    cph05a reacted to Fatboyz's post in the thread Got the start for my 550 build with Like Like.
    Things went well today. Nice hot weather. Got some painting done and a window in. Little more sheeting too.
  • cph05a
    cph05a replied to the thread SRW 450 Mountain Build.
    It's a 60"CA and I'm doing a 10ft floor. The original flatbed I had on the truck before was 9ft long.
  • cph05a
    cph05a replied to the thread SRW 450 Mountain Build.
    I talked with 1st attack over the phone several times. They're pretty responsive but they're 20x11 and I was really wanting 20x10 and...
    • spare.jpg
  • cph05a
    cph05a replied to the thread Looking at a northstar tc800.
    I have a 1995 northstar that's in worse shape than that one. Try pushing on the ceiling and make sure it it's squishy as I've heard that...
  • cph05a
    cph05a replied to the thread SRW 450 Mountain Build.
    The one I got was $150 and it had most of the tread remaining. I got to go dig through the tires they had and pick one I liked. They...
  • cph05a
    cph05a replied to the thread SRW 450 Mountain Build.
    Updates! The cosmetic repairs on the exterior are done and primed for paint, and I installed two 250W oil pan heaters. I've been trying...
    • frame1.jpg
  • cph05a
    Good to see another rare Tiger in the wild!
  • cph05a
    cph05a replied to the thread SRW 450 Mountain Build.
    These are great. This guy definitely has the best looking fender flares of the big 41" SRW trucks I've seen. It's a bit more than I'm...
  • cph05a
    cph05a replied to the thread Jacks for expedition vehicles.
    I ended up getting a 12ton bottle jack from the local harbor freight and it seems to work well enough. I plan to get some new jack...
Top