https://www.clearviewmirrorsusa.com/travel-storage/clearview-easy-slide/
They were in stock a couple of weeks ago on their website, but alas I waited to long to pull the trigger and no they are out of stock.
I'm located in SoCal, but willing to pay for shipping as well or drive to you within...
Running the SPC uppers as well, been hard to find a decent shop that can get the alignment right and know how to make adjustments using the SPC's. The last place I went to finally dialed it in using the infamous "DJ Specs" but still only made adjustments at the cams. I think I might spring...
Thanks for the info @toyotech and @Kpack. Definitely don't want to make the same mistake I did with the toytech coilovers and jack up the Foxes just to try and solve the rub issue! I'm running 33s and all of my rubbing issues are on the frame and only at full turn. A lot of it was cleaned up...
So I decided to sell the rooftop tent and start sleeping in back of the truck. Picked up the 23 Zero Peregrine 180R Awning with the wall kit. First trip out and so far I really like the setup. Super easy to setup, had some moderate winds kick up in the afternoon with no issues and the LST...
Not as clean as she use to be, definitely starting to showing some battle wounds!
Some recent pics and upgrades!
I'll see how long the cheapo switch assembly holds up, I've heard of some guys having really good luck with them.
Thanks for the reply! After some more conversations with Fox and Poly Performance, I have it dialed in. DS has an installed spring length of about 14.25" and the PS is at about 14.5" Still has a little bit of the DS lean, but both Fox and Poly Performance recommended not going above 2" of...
Picked up this Tundra back in January of 2015 with just shy of 80000 miles! Not my daily driver thankfully so I've only put about 40000 miles on her. Eventual full overland build so I can travel full time after retiring from the military. Very slow in getting to where I am now, but slowly...
I just replaced the lower control arms on my 2005 tundra. I payed the extra money and went with OEM through Olathe Toyota Parts Center (parts.olathetoyota.com). So far they are the most discounted OEM parts I've been able to find. I've read too many stories on these forums of guys using Moog...
So I contacted Fox about the brake line issue and they were less than helpful. Basically if it starts making contact and I send them pics they might send me some different spring perchs. With that said I decided to take the chance and went ahead with the install of the Fox 2.5's with the 700#...