Bikersmurf's latest activity

Push pin wheel alignment. Put a pin in the back of both tires at the back as close to the centre as possible. In this case 14” off the...

I’ve long since accepted that an 88” wide box with 8’ wide duallies that is 21’ long won’t go the places my 13’ long 5’ wide Fj40 will...

Now installed. Leaves more space than any other bench I’ve seen. Also lifts out with the pull of a lever.

Haven’t seen enough to know what is “normal”. The conversion van bench I have from a ‘79 Econoline van bolts down with 4 1/4” thick x...

2003 Jeep TJ. They are a perfect fit with wise between the inner fenders. Only thing that would make them better is having the mounts...

Almost ready to be bolted in and painted.

I can relate… much like drywall work, some things I don’t want to get good at… even if I could get good at it.

It’ll sit slightly higher than originally and be reclined a bit more for comfort.

Bench seat upgrade… Previous bench gone. Started fabricating my own taller brackets to mount them. Lots more to do.

Have you made any progress since I saw the stripped out Ambo box at your place?

‘76 axle with 3.70 “60 series” gears, new brake lines, rebuilt knuckles, newer housing, and castor shims to improve alignment. :D...

Living in the van while stationary is going pretty well. Been working and saving money and just trying to enjoy life while I got it...

So, jus so y’all know I’m still around… For 10+ years I’ve been trying to fit in an axle rebuild and diff swap. I’ve had 3.70 in the...

Does your shower pan fold/slide out of the way? My first thought is that you should have more open space in the middle. It feels...