bajajoaquin's latest activity

I upgraded my tire inflator. I had a spare section of 36” hose with crimped 1/4” NPT connections on each side. That made the...

Thanks. That’s a lot of good info. It already has 16s on there, so that’s not an issue. It seems that I’m on the right track.

As a gross generalization, “taller” tires - higher aspect ratio, therefore on the smallest wheels that will fit over brakes, are best...

The limitation I’m seeing is the tire being on its sidewall even at relatively high pressures. That resulted in a sidewall puncture the...

It’s really not so bad. With the lift and tires it hasn’t been a problem for me at all. But that’s probably because I have very modest...

Unfortunately the inflator has a crimped connection to the chuck and the other end is smaller than 1/4 NPT so my spare hose won’t work...

Hmm. Mine is a crimped on connection. I’ll have to see if I can manage that.

Interesting. What fitting attaches it to the inflator?

I’ve got an ARB dual compressor onboard air compressor and a Viair locking air chuck. It’s got the trigger style valve with the gauge on...

And since things don’t exist without pics….

So you’re a little lighter than me but still heavy. I’m 14,500 loaded up for a trip. Down at 60 psi I was really on the sidewalls more...

I am coming out of the past, but missed this before. Yes, it’s a BW 1356 with about a 2.7 low ratio. The chassis is an E450 so that’s...

How big was your motorhome and how much did it weigh?

Thanks guys. I totally forgot I posted this and just posted it again. Lol.

I just got back from Baja in my 24’ Class C 4x4 that I upgraded with U-Joint 6” suspension. It already went better on washboard roads...