gmwelder86
Adventurer
Still waiting for my lost_gp plate but figure I would start a build thread so here we go. Started with a 2014 jkur in dune with half doors. Later learned this was an order only option. Drove the jeep stock for 6 months thsn built a rack for the back, installed some lights and was good. Although wanting a lift it wasn't in the cards. Than comes a chance to do something I always wanted to do, a trip to moab. So the spending started. Rock krawler stock mod kit from northridge, posion spyder bfh front bumper, ebay reay bumbler with tire carrier. Modded the stock rubicon sliders with a step, more engine and tranny skid, 2m radio and cb. Jerry can and hi lift on tire carrier. During moab realized the rock krawler springs couldn't take the weight of a fully loaded jku so I ordered a set of ome 620s for the rear and they handle the jeep and tent trailer just fine. Future mods will be 35s, trussed front axle, winch and a 50qt arb fridge in the near future, as well as Psc hood panel. This weekend I'll be redoing the jerry can rack to add a second can and changing how I carry the hi lift.
Attachments
Last edited: