IllianaXJ
07-17-2008, 11:25 PM
Finally got around to installing the Lumina Z34 hood vents I bought on eBay a while back. I never had any problems overheating, but I tend to run my electric fan a lot on the trail, so I figured these would help out a bunch.
http://i61.photobucket.com/albums/h76/bfourman/01XJ/HPIM1373.jpg
Install was pretty straightforward; measure 10 times, cut around the hood crossmember, trim the vent a bit to fit and bolt it in. I was left with a 1/8" gap since the Z34 hood has a nice recessed area for the vent to fit in, so I filled it in with black RTV. You can kinda see the crossmember through the vents in the pic, I sprayed the exposed portion black so it didn't stick out like a sore thumb.
It only took me 2 days working on and off and three trips to Rural King for hardware to get it done :D
It's kinda cool to watch the heat rising out of the vents at a stoplight, and I know it will help keep temps under control while on the trail.
Any questions, let me know!
http://i61.photobucket.com/albums/h76/bfourman/01XJ/HPIM1373.jpg
Install was pretty straightforward; measure 10 times, cut around the hood crossmember, trim the vent a bit to fit and bolt it in. I was left with a 1/8" gap since the Z34 hood has a nice recessed area for the vent to fit in, so I filled it in with black RTV. You can kinda see the crossmember through the vents in the pic, I sprayed the exposed portion black so it didn't stick out like a sore thumb.
It only took me 2 days working on and off and three trips to Rural King for hardware to get it done :D
It's kinda cool to watch the heat rising out of the vents at a stoplight, and I know it will help keep temps under control while on the trail.
Any questions, let me know!